Guide to vehicle sanitation

Guide to sanitizing vehicles with the Ozone-O3 multi-sanitizing station.

With the Covid-19 virus pandemic, sanitation and disinfection procedures have become essential to safeguard the health of people in public environments.

The new Ozone O3 multi-sanitizing station has recently been added to our product range, a device designed for the sanitization of transport vehicles such as trucks, buses and building spaces from 150 to 300 m2 equipped with a ozone generator and a nebulization system.

In this article, a guide to sanitizing vehicles with our sanitizing station will be illustrated step by step, with useful tips and warnings for a correct, professional and safe sanitation.

1) Preparation for sanitation

Remove any objects inside the vehicle and close all windows and doors. Place the station on the floor as close as possible to the air intake of the ventilation system.

Unscrew the cap located on the top of the Ozone-O3 and enter the amount of sanitizer as indicated in the table in the “usage and maintenance” manual supplied with the machine.

Connect the station to a power supply, if you need to sanitize a room, you can use the adapter for 220 V wall sockets.

Start the vehicle with the handbrake engaged and set the ventilation system to “air intake from outside”, with minimum temperature (16 °C), fan at minimum speed, uniform air distribution on all air vents and air conditioning switched on.

2) Setting the sanitation program

Before proceeding with sanitization it is important to remove people and animals from the area intended for sanitation, because ozone is harmful.

Minimum inhalation: Respiratory problems, itchy eyes;

Prolonged inhalation: Sense of suffocation, possible pulmonary edema, nausea, vomiting and loss of consciousness and a state of coma in humans after one hour of continuous exposure.

It is important to inform the staff present and close any access points to the area.

Once the area has been made safe, it is possible to set the most suitable program for the area to be sanitized (cars, trucks, buses, 150 or 300 m3 rooms) via Air-O3, the Android smartphone application managed with the phone’s Bluetooth system.

Sanitation with the Ozone-O3 station is divided into two phases: ozonation and nebulization. In both phases it is possible to set the processing times, the cycle start time or choose whether to process only the ozone cycle or the nebulization cycle.

Sanitation setting only ozone cycle.

Sanitization setting only nebulization cycle

Select the “Start” button, a window will appear in which to enter the data of the vehicle to be sanitized which will be shown in the certificate of successful sanitation.

 Click on the “Check” button to start the sanitization cycle.

Warning: When the sanitation process begins, a safety beeper is activated which has the purpose of alerting people in the vicinity of the sanitation in progress.

3) Post-sanitization operations

Select the “Start” button, a window will appear in which to enter the data of the vehicle to be sanitized which will be shown in the certificate of successful sanitation.

 Click on the “Check” button to start the sanitization cycle.

4) Print certificate of successful sanitation

The smartphone application also has a section dedicated to printing the certificates of successful sanitation of the treated areas.

Confirm the print.

Finally, a pdf file will be exported with the transcription of the times and the data previously entered at the time of starting the sanitation cycle to be shown in case of checks.

Select the icon for printing certificates.

 Select the sanitizing cycle to be printed in the table.

For more details and information on the Ozone-O3 Multi-Sanitizing Station:

Electric Single-brush maintenance

Electric single-brush batteries maintenance

Advice on the correct use and maintenance of batteries for Iteco Washing Systems autonomous single-brush machines with battery powered electric motor.

Ordinary maintenance operations are essential to maintain the high performance of your single-brush washing system over time.

In this article we want to give you some useful tips on the correct use and maintenance of batteries for models with electric motors such as Truck Wash E500 and Easy Wash 300E.

Type of batteries to be used

To work, our electric single-brush machines need a battery system with the following characteristics:

1. Four 6V – 210Ah batteries

2. Two 12V – 186Ah quick charge pure lead batteries

3. A twelve cell battery of 2V-320Ah

Each configuration must be connected following the diagram shown in the images below

Batterie di serie

Four 6V – 210Ah batteries

batteria al piombo

Two 12V – 186Ah quick charge pure lead batteries

Batterie 12 elementi

A twelve cell battery of 2V-320Ah

Attention: when connecting the batteries, be very careful not to reverse the polarity, to avoid damaging them.

Status and information on charging

Each electric floor machine has a battery charge status monitoring display.

batteria carica

If most of the lights are on, the batteries have a good state of charge;

Batteria scarica

If more than half of the lights are off, then you should recharge them as soon as possible.

If they are discharged, they must be recharged using a suitable battery charger by connecting it to the appropriate socket supplied with the device. For a longer lifespan of the batteries it is necessary to avoid partial charging and also to completely discharge the batteries.

For more information on the maintenance of your Iteco Washing Systems brand systems:

Additional equipment: Contour-tracking HP roof bar

Additional equipment for the Iteco gantry washing systems

Together with the wash systems, Iteco Washing Systems offers a wide range of additional equipment to add to its washing station, optimizing the cleaning performance of the vehicles.

Barra osc_
Barra osc_retro

Among these accessories is the Oscillating Bar, a mobile bar equipped with high pressure nozzles that can be installed on the gantry stations of Iteco Washing Systems. The contour-tracking roof bar is able to perform all the prewash, wash and rinse phases in a short time and wash the entire length of the vehicle.

For more information about ours Additional equipments:

Join the Iteco Washing Systems team

Join the team of authorized distributors and resellers of Iteco truck and bus wash systems.

Thanks to its network of authorized distributors and sales partners, Iteco Washing Systems has been able to make its products dedicated to truck and bus washing known all over the world.

Recently our sales team decided to expand its collaboration network and search with companies specialized in the distribution and resale of vehicle washing materials and the automotive sector that have a good knowledge of the Northern European market.

Easy Wash – Professional and cost-effective washing.

Single brush washing systems for a professional and cost effective washing of Trucks and Buses.

In the range of single brush washing systems, you can find also the models Easy Wash conceived and designed to offer a professional and cost effective washing for trucks and buses fleets of small dimensions.


Easy Wash 50E

Single brush washing system connected to power supply, AC 380 V 3 phases or 220 V mono phase

The system includes.

• Washing system easy to drive able to clean an Artic in less than 10 minutes with a maximum water consumption of 150 Litres of water. The single brush is able to clean the whole vehicles surface and with its tilting facility you can easily clean the sloping driver’s cabin

• Driving system with a wheeled trolley for manual moving, with two directional wheels and four pivoting wheels ensuring good grip and linear driving.

• 24V electric controls: totally protected and safe, tested complying with CE standards.

It can be used both indoor and outdoor, thanks to its reduced size of two square meters. The height can be customized on demand.

Quick installation in two ways: by direct connection. Cables and hoses are connected on the back of the machine without any driving system with cables and hoses free or with overhead rail installation through wall supports or poles.

Easy Wash 300

Single brush self-propelled washing system with hydraulic traction

Equipped with a hydraulic traction system, the single brush easywash does not require any connection to power or water supply.

An excellent solution for a washing service immediate and complete necessary for the transport companies or bus and coach operators with a limited number of vehicles.

The system consists of a single brush allowing the washing of the whole vehicles body and with its tilting facility of 20° you can easily clean the sloping driver’s cabin

The driving system includes double controls on both sides of the machine and allows the operator to drive it in both sense of directions.

Easy wash 300 is available in three versions:

• Model 300B (Petrol Engine

• Model 300D (Diesel Engine)

• Model 300E (Electric Motor with batteries)

Truck Wash

TRUCK WASH washing system for commercial vehicles

Professional and economical mobile washing system for commercial vehicles and public transport

The single brush washing system truck wash is an independent self-propelled washing system conceived to assure complete external cleaning of heavy-duty vehicles such as trucks, trailers, tankers, RV, special vehicles and buses.

Surfaces total cleaning guaranteed

The washing system can clean the whole surface of the vehicle, thanks to its brush tilting device up to 20°

Washing time: maximum 10 minutes

Truck Wash is able to perform a complete wash of the vehicle in a maximum time of 10 minutes. This makes it ideal to operate intermediate washes between two transport services.

Three driving positions:

The single brush offers three types of driving: walk around, on board on a platform and sitting.

Guida a terra
Guida in piedi a bordo
Guida in piedi a bordo
Guida da seduto a bordo

The washing system truck wash is available in the following versions
– D500 powered by a diesel engine (silenced motor available on demand)
– D500 HP powered by a diesel engine and equipped with a High-pressure lance.
– E500 powered by electric motor and batteries 24V